Repairs Holes in Tarmac and Asphalt Surfaces
Cold Lay Repair Tarmac / Asphalt compound is carefully formulated for ease of use and to give good results for small repairs to holes or cracks. It is very easy to use directly from the container, apply to damaged area by hand and simply compact into place. AVAILABLE IN BLACK OR RED.
Once the tarmac repair is complete, Tarmaseal repair coating can be applied to the area straight away.
Cold Lay Repair Tarmac / Asphalt is ready to use quick, cost-effective repairs to paths and driveways.
Simple to use; no specialist tools or equipment are required.
Ensure the area where the cold lay repair is to be laid is clean and dry.
Apply the included 0.25 Litre Primer to the area to be repaired.
Use an ordinary rake, spade or trowel to spread the cold lay repair. Leave approx 10mm higher than damaged area to allow maximum compaction.
Use a heavy, flat object for ‘tamping’ Wet the tamper frequently to avoid the cold lay repair sticking to the tool.
When repairing deep pot-holes (greater than 30mm) lay the cold lay repair in two stages.
Thoroughly compact the first layer to 20mm and leave for 24 hours. Then thoroughly compact second layer to the required level. Allow the repair tarmac to harden fully.
It is not recommended to use product in temperatures below 10 degrees
After prolonged storage, it may be necessary to expose the cold lay tarmac to direct sunlight for 1-2 hours prior to opening to soften the material and restore workability.
Coverage rates will vary greatly relative to depth of potholes.